Technology
Solar Panels in Darwin 2026, Installation Costs, STC Zone 1 Rebates, NT Feed-in Tariffs, and How to Find a CEC Accredited Installer
Darwin solar panels guide 2026: how much solar panel installation costs in Darwin after the federal STC Zone 1 rebate (highest in Australia), NT feed-in tariff arrangements, cyclone-rated mounting requirements, and how to find a CEC-accredited solar installer near you.
How we reported this

Solar Panels in Darwin 2026
Darwin has outstanding solar economics, STC Zone 1 (highest rebate in Australia), exceptional dry season sun hours (the best in Australia), and high electricity prices under Territory Generation and Power Water make rooftop solar very compelling in Darwin. The average Darwin 6.6kW system generates approximately 32-38kWh per day during the dry season. energy.gov.au
How Much Do Solar Panels Cost in Darwin 2026?
- 6.6kW solar system (after federal STC Zone 1 rebate, supply + install), typically $5,500-$8,200 (cyclone-rated mounting included)
- 10kW solar system (after STC rebate), typically $8,200-$13,200
- 13.2kW solar system (after STC rebate), typically $10,200-$16,200
- Battery storage, Tesla Powerwall 2 (supply + install), typically $13,500-$17,000
- Battery storage, BYD HVM 8kWh (supply + install), typically $8,800-$12,500
Darwin Solar, Cyclone Mounting and Wet Season Considerations
Darwin is in STC Zone 1 and Wind Region D, all solar mounting systems in Darwin must be engineered and installed to cyclone wind load standards. The Darwin wet season (November-April) brings cloud cover that reduces solar generation significantly, Darwin's extraordinary dry season production (May-October) compensates across the year. Darwin does not currently offer a feed-in tariff comparable to eastern states, self-consumption and battery storage maximise Darwin solar economics. CEC accreditation required. cleanenergycouncil.org.au
This article was compiled by AI and screened before publishing. See our editorial standards.